Radar

VEGAPULS: Level measurement with Radar

VEGA has been a technology leader in the area of radar level measurement for many years. In almost every industrial process, the levels of liquids, muds, pastes, powders and bulk solids have to be measured continuously in tanks, silos, containers and pipelines.

  • VEGAPULS 61
  • VEGAPULS WL 61-the specialist for water management
  • VEGAPULS 62-– the universal genius for liquids
  • VEGAPULS 63-especially hygienic and chemically stable
  • VEGAPULS 65-ideal for small process fittings
  • VEGAPULS 66-turbulent surfaces under control
  • VEGAPULS 67-the economic solution for bulk solids measurement
  • VEGAPULS 68-a tough instrument for tough environments


  • Guided microwave

    VEGAFLEX: Universal sensors for bulk solids and liquids

    High frequency microwave pulses are coupled on a cable or rod and guided along the probe. The pulse is reflected by the product surface and received by the processing electronics. This electronics evaluates the echo signal and converts it into a level information. All instruments are preset to the ordered probe length. The shortenable cable and rod versions can be adapted to the individual conditions on site.

  • VEGAFLEX 61-TDR sensor for continuous level measurement
  • VEGAFLEX 62-TDR sensor for continuous level measurement
  • VEGAFLEX 63-TDR sensor for continuous level measurement
  • VEGAFLEX 65-TDR sensor for continuous level measurement
  • VEGAFLEX 66-TDR sensor for continuous level measurement
  • VEGAFLEX 67-TDR sensor for continuous level measurement



  • Ultrasonic

    VEGASON: Contactless measurement with ultrasonics

    Short ultrasonic impulses in to range of 10 to 70 kHz are emitted by the transducer to the measured product, reflected by the product surface and received again by the transducer. They spread with sound velocity. The time from emission to reception of the signals is proportional to the level in the vessel. The proven ECHOFOX signal processing filters out the correct level echo reliably from a number of false reflections. An adjustment with empty and full vessel is not necessary!

  • VEGASON 61-Ultrasonic sensor for continuous level measurement
  • VEGASON 62-Ultrasonic sensor for continuous level measurement
  • VEGASON 63-Ultrasonic sensor for continuous level measurement
  • VEGASON 64-Ultrasonic sensor for continuous level measurement
  • VEGASON 65-Ultrasonic sensor for continuous level measuremen



  • Capacitive

    VEGACAL series 60: Level measurement in solids and liquids

    The proven capacitive measuring principle is one of the most common measuring principles for level measurement in the industrial measurement technology. Sensor and vessel form the two electrodes of a capacitor. A capacitance change caused by a level change is processed by the integrated electronics and converted into a switching signal.

  • VEGACAL62 -Capacitive rod electrode for continuous level measurement
  • VEGACAL63 -Capacitive rod electrode for continuous level measurement
  • VEGACAL64 -Capacitive rod electrode for continuous level measurement
  • VEGACAL65 -Capacitive cable electrode for continuous level measurement
  • VEGACAL66 -Capacitive cable electrode for continuous level measurement
  • VEGACAL67 -Capacitive high temperature electrode for level measurement



  • VEGACAP series 60: Level detection in solids and liquids

    Sensor and vessel form the two electrodes of a capacitor. A capacitance change caused by a level change is processed by the integrated electronics and converted into a switching signal. Due to cable and rod versions, suitable instruments are available for all applications. Because the capacitive measuring principle requires no special installation and mounting, a number of applications can be equipped with these level switches.

  • VEGACAP62-Capacitive cable electrode for level detection
  • VEGACAP63- Capacitive cable electrode for level detection
  • VEGACAP64- Capacitive cable electrode for level detection
  • VEGACAP65- Capacitive cable electrode for level detection
  • VEGACAP66- Capacitive cable electrode for level detection
  • VEGACAP67- Capacitive cable electrode for level detection
  • VEGACAP27- Capacitive cable electrode for level detection
  • VEGACAP67- Capacitive cable electrode for level detection
  • VEGACAP35- Capacitive cable electrode for level detection
  • VEGACAP98- Capacitive cable electrode for level detection



  • VEGABAR series 10: Pressure measurement in gases and liquids

    The measuring ranges of pressure transmitters start at a few millibar and reach up to several hundred bar. Pressure transmitters from VEGA are equipped with metallic or ceramic measuring cells and offer excellent long-term stability as well as high overload resistance.

  • VEGABAR 17
  • VEGABAR 51
  • VEGABAR 52
  • VEGABAR 53
  • VEGABAR 54
  • VEGABAR 55
  • VEGABAR 66
  • VEGABAR 67